目前在用森海克斯8800手台，发现通过中继接收完别人的信号之后总会有一小下的噪音，还没试过直连，想请问各位大佬应该如何设置可以消除这个噪音。目前在写频软件中有【尾音消除】、【过中继尾音消除】、【过中继尾音延迟】、【中继导频频率】，想请问这几个参数分别什么意思，以及如何设置？ [upl-image-preview url=https://storage.hamcq.cn/2024-05-11/1715397171-603293-20240511111244.jpg]

@"BI1TDZ"#p17492 [upl-image-preview url=https://storage.hamcq.cn/2024-05-11/1715417208-987206-d7838a49cea6f41bc15cf34d3d3138c.jpg] 正常现象

@"BI1QMI"#p17529 谢谢您的回复！请问在对方说话开始和结束的时候，喇叭都会发出很响的啪的一声，插入耳机尤为明显，这种现象正常吗？我平常需要戴耳机，震得耳朵很不舒服

@"BI1TDZ"#p17532 我用手台没带过耳机不知道你什么情况，大概率喇叭的问题。我8600没出现过这种问题，结构都是一样的。

@"BI1QMI"#p17537 好的，谢谢您！

@"BI1TDZ"#p17532 找到了类似的问题 https://www.mydigit.cn/forum.php?mod=viewthread&tid=239049

@"BI1QMI"#p17529 感谢回复:)我就说这段时间用VX6R的时候出现了这个现象，还以为是设备故障。

Could you please advise on the settings related to eliminating tail noise when using a handheld radio?

BI1TDZ

I am currently using the Senhaix 8800 handheld, and I have noticed that after receiving a signal through a repeater, there is some residual noise. I haven't tried connecting directly yet, but I would like to know how to configure it to eliminate this noise.
Currently, in the software, there are the following parameters: "tail-end noise suppression," "excess repeater tail-end noise suppression," "excess repeater tail-end delay," and "repeater pilot frequency." Could you please explain what each of these parameters means and how to set them?

BI1QMI

BI1TDZ
Normal phenomenon

BI1TDZ

BI1QMI Thank you for your reply! I'm wondering if the speaker makes a loud "pop" sound at the beginning and end of conversations, and this is particularly noticeable when using headphones. Is this normal? I usually need to wear headphones, but it's making my ears uncomfortable.

BD8DLV

BI1QMI Thank you for the reply. I was right to suspect that this issue occurred when using the VX6R during that period, and I initially thought it might be a hardware malfunction.

BI1QMI

BI1TDZ I haven't used a handheld radio with headphones before, so I don't know what your situation is. It's likely a problem with the speaker. My 8600 hasn't had this issue; the structure is the same.

BI1TDZ

BI1TDZ I found a similar problem. https://www.mydigit.cn/forum.php?mod=viewthread&tid = 239049

BI1TDZ

BI1QMI Okay, thank you!

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起