😭刷机IJV3固件的时候没有保存备份，现在静噪废了，所有静噪等级都是-75db。谁知道IJV3固件的静噪参数怎么设置啊！！就是菜单71、72、73项设置。

没有综测是没法调的，找别人的校准备份用吧。

@"BI1TNW"#p17065 我有校准的文件，

我也是刷的这个固件，感觉不好，又刷回官方了，

不用，调隐藏菜单里的静噪，再开机调一下静噪和模式

@"BI1TNW"#p17065 如果需要K6的校准文件，可以联系我，发你一个我备份出来的试试

Help! My QuanSheng K6 is malfunctioning.

BI1TNW

😭When I flashed the IJV3 firmware, I didn't create a backup. Now, the noise reduction is no longer working, and all noise reduction levels are -75dB. Does anyone know how to set the noise reduction parameters for the IJV3 firmware? Specifically, in menu items 71, 72, and 73.

deepweb

BI1TNW I have calibration documents.

YAOQI

BI1TNW If you need the calibration file for K6, please contact me and I will send it to you.

SilentYANG

Without a comprehensive test report, it's impossible to adjust it. You should use a copy prepared by someone else instead.

deepweb

I also flashed this firmware, but it didn't work well, so I reverted back to the official one.

BH7HCU

No need to do that; instead, adjust the noise reduction in the hidden menu and then restart the device to fine-tune the noise reduction and mode settings.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起