The following errors have been made, including but not limited to:
1. The rope I bought was too thin and short. -35
2. Zhibzi bought 1.5 square meters of silver-plated Teflon (very expensive), -100
3. The thick insulating material for the electrical components makes it impossible to separate them using my existing tools, -7.5 (Jiali Create startup)
4. I just woke up and realized that the excitation oscillator length needs to be twice as long. Fortunately, it's enough.
5. The fishing rod I bought has a tolerance that is too large (probably not my fault).
6. When trying to install the base, I made a mistake and ended up with a one-piece molded product, which required cutting off a 1-meter long pipe. (GP support achieved)
7. I only bought two bolts; the fasteners haven't arrived yet (garbage ST, YD), , , ,
8. If the resonator mounting holes are not left, the resonator connection may directly bear the load. We hope that Teflon can withstand this.
9. The cable seems to be too long, probably around 5 meters should be enough for connecting wires and wrapping around the hollow tube.
Note: It's better to spend money to ward off bad luck than to not study for a week, which is really irresponsible.
(Note: Next time, try using AV680)
(Note: I'm wondering if the "eco-friendly plastic" from Taobao's D-扣 system is less effective at UV protection than zip ties. I'll try it out to see if it works.)
Let's talk about it later.
闽ICP备2021006864号-7
闽公网安备35020602002794号